The 51-P-850 tool has a single groove for 5/32" and 3/16" sleeves and stops.

The 51-Q-929 tool has a single groove for stop sleeves with the letter "Q" in their stock numbers.

The 51-X-850 tool has a single groove for sleeves with the letter "X" in their stock numbers.

Designed to speed up bench type cable assembly work by allowing for one hand operation of bench press thereby freeing up the other hand to position sleeve and cable.

Nicopress No. 635 Hydraulic Tool.
Larger Nicopress sleeves require greater pressing effort, and the No. 635 Hydraulic Tool is made for this purpose.

The 63V-XPM tool has three grooves and is used with oval sleeve sizes 1/8", 5/32" and 3/16' and stop sleeve sizes 5/32", 3/16", 7/32".

The 64-CGMP tool has four grooves and is used with oval sleeve sizes 1/16", 3/32", 1/8" and 5/32' and stop sleeve sizes 1/16", 3/32", 1/8", 5/32", 3/16" and 7/32".

The 64-CGMPC tool has four grooves and is used with oval sleeve sizes 1/16", 3/32", 1/8" and 5/32' and stop sleeve sizes 1/16", 3/32", 1/8", 5/32", 3/16" and 7/32". With cutter.

Full safety, two-finger trigger activation is easy to use with or without work gloves. Designed for operation from either the left or right handed position, the unit is ergonomically balanced at the trigger mechanism to minimize operator fatigue.

Offering Air Logic control system to insure repeated quality crimps. The tool operates in the vertical and horizontal modes for maximum production.