|Quick-Connect® fittings make cable projects quicker and easier than ever
Each assembly comes with a Threaded Terminal fitting pre-attached to one end and a field installed Quick-Connect® SS fitting for the other end. Simply secure the Threaded Terminal to one end post, lace the free end of the cable through the remaining posts, slip on a Quick-Connect® SS, tension the line, trim the excess, and finish with decorative end caps.
|Our unique patented stainless steel Quick-Connect® SS fitting is attached to the cable in the field without special tools. One-way jaws allow the cable to easily slide through the fitting in one direction but automatically grab and lock-on when the cable is released. Just slip it on, pull the cable tight, and cut the excess.||The Cable is 1x19 construction, 316-grade stainless steel for strength, durability, and weather protection. Available in 1/8", 3/16" and 1/4" diameters.||The stainless Threaded Terminal fitting is fastened (swaged) to one end of the cable at the factory. It is then attached to an end post using our unique Snug-Grip® Washer Nut with special gripping threads to help prevent the nut from loosening. Spin the nut to adjust final tension in the line. Available in 7-1/2" length for wood posts and 4-1/4" for metal posts.||Flat Washers and Snug-Grip® Washer Nuts are all included. Colored End Caps and Stainless steel End Caps are also available as accessory items.|