Classic Deck Toggle - Non-tensioner

Classic Deck Toggle - Non-Tensioner

The Ball Stud Tensioner is a simple fitting that will take the angle of a stair railing. The mounting holes must be drilled at the true angle or with a slot.

Handy Crimp Tool P/N 11HCT1 Required.

The Ball Stud Tensioner is a simple fitting that will take the angle of a stair railing. The mounting holes must be drilled at the true angle or with a slot.

Handy Crimp Tool P/N 11HCT1 Required.

1/8" Classic Handy Crimp Ball Terminal (Termination Stud)

3/16" Classic Handy Crimp Ball Terminal (Termination Stud)

1/8" Classic Handy Crimp Button Terminal (Termination Stud)

3/16" Classic Handy Crimp Button Terminal (Termination Stud)

The Countersunk Stud Tensioner is a great way to terminate cable in a flush fitting. An 82-degree countersink makes the bevel sit flush for a clean, simple look. To be used on straight runs only.

Handy Crimp Tool P/N 11HCT1 Required.

The Countersunk Stud Tensioner is a great way to terminate cable in a flush fitting. An 82-degree countersink makes the bevel sit flush for a clean, simple look. To be used on straight runs only.

Handy Crimp Tool P/N 11HCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck toggle base. The articulation range of this Deck Toggle end fittings is greater than 140 degrees.

Handy Crimp Tool P/N 11THCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck toggle base. The articulation range of this Deck Toggle end fittings is greater than 140 degrees.

Handy Crimp Tool P/N 11HCT1 Required.

This simple cable tensioning system provides for an extremely "clean" look concealing the threads for adjustment internally. The Typical application is for short to medium length cable runs.

Handy Crimp Tool P/N 11HCT1 Required.

This simple cable tensioning system provides for an extremely "clean" look concealing the threads for adjustment internally. The Typical application is for short to medium length cable runs.

Handy Crimp Tool P/N 11HCT1 Required.

Utilizing "Clevis" style ends for cable attachment, this system allows for connection to eye bolts, tee-stock, angle iron, flat bars, loops, ect. Toggle ends come standard with clevis pin and ring pin.

Handy Crimp Tool P/N 11THCT1 Required.