Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11HCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck Toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11HCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck Toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11THCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck Toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11THCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck Toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11HCT1 Required.

Deck Toggles provide a face mount solution while allowing for angled takeoff. These fittings are attached utilizing two screws through the Deck Toggle base. The articulation range of this Deck Toggle end fittings is greater than 180 degrees.

Handy Crimp Tool P/N 11THCT1 Required.

The Lag Stud has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11HCT1 Required.

The Lag Stud has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11THCT1 Required.

The "Lag" cable tensioning system has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11HCT1 Required.

The "Lag" cable tensioning system has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11THCT1 Required.

The "Lag" cable tensioning system has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11HCT1 Required.

The "Lag" cable tensioning system has been developed for direct attachment to wood surface with a minimum of 3" of wood blocking for full thread engagement. Holes are simply pre-drilled into the connecting wood surface and the lag is threaded into the hole.

Handy Crimp Tool P/N 11THCT1 Required.

This simple cable tensioning system provides for an extremely "clean" look concealing the threads for adjustment internally. The Typical application is for short to medium length cable runs.

Handy Crimp Tool P/N 11HCT1 Required.

This simple cable tensioning system provides for an extremely "clean" look concealing the threads for adjustment internally. The Typical application is for short to medium length cable runs.

Handy Crimp Tool P/N 11HCT1 Required.

This simple cable tensioning system provides for an extremely "clean" look concealing the threads for adjustment internally. The Typical application is for short to medium length cable runs.

Handy Crimp Tool P/N 11HCT1 Required.